Cleanroom Terminal HEPA Filter Housing Cassette H13/ H13 HEPA
The HEPA Replacement Air Filter ensures it yields only clean
filtered air from the filter face, when connected to a duct system
or fan via its spigot connection on the rear of the filter.
the cassette casing is the integral case of the HEPA filter as
(No clamping pressures, gasket seals and the quality of the sealing
mating face, associated with the traditional Terminal Housing.)
Once connect to the round inlet duct , only filtered air can leave
the filter, as individual testing before leaving factory
casing:extruded Aluminum frame
ceiling connect plate: galvanized or cooled-roll steel
Filter media:mini pleat Glass fiber
thermal insulation PEF fiber : on request
distribution plate: on request
Duct: 8cm height,
Diameter : 250 mm (10 inches )or 300 mm(12 inches )
(others duct diameter or request ; inlet collar designed
with continuous rib to help retain the ductwork on collar.)
Use the highest temperature, humidity:80℃,80%
ir flow @0.45m/s
|Initial Resistance Under Standard air flow|
|Operation temperature||80 celsius degree(158F),aluminum foil,fiberglass,and insulated
cotton enclosed on the back.|
|Cabinet||Sand acid and pressed aluminum,standard frame|
|Sealed material||The seal spacer is installed on the air outlet unless clients
|The positioning of protective net||Air leaving side|
|Filtering paper||High efficiency particulate air filters(fiberglass paper,0.3
micron,efficiency of 99.99%)|
|Options||Ulpa Air Filter(waterproof fiberglass,0.3micron,efficiency of
|No protective net|
|Separator and airflow controller|
|Adjustable diffuser plate with separator|
|300mm(12'')adapter tube of air supply|
1. Aluminium frame and cover are antirust.
2. By standard diffuse mesh ,the airflow will be fluent.
3. Inlet tube could prevent loss of air.
4. Use special resin of without phosphorus to seal the media and
5. Do not allow for break up and blocking of wind velocity.